Akyga AK-L2-025 Manuel de l'utilisateur - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Akyga AK-L2-025. Akyga AK-L2-025 4 pages. Led
Imprimer la page
AK-L2-025 - user manual
Connecting the Power Supply to
1.
Prepare the 3-wire power cable.
2.
Remove the insulation from the ends of the cables (about 0.5 cm).
3.
Solder or twist the input wires of the power supply with the power cable according to the colors.
4.
Insulate the connected wires so that they do not touch and do not get wet.
5.
Turn on the power.
Wires collors:
1.
Phase conductor connector (L - brown).
2.
Neutral conductor connector (N - blue).
3.
Safety conductor connector (green - yellow).
4.
Output connector from power supply (COM - blue).
5.
Power supply input connector (+V - brown).
Cleaning the power supply:
Disconect the power supply from the electrical socket and connected devices before cleaning.
Use soft and antistatic cloth for cleaning the power supply.
ź
Do not use abrasive or chemical cleaners.
ź
Technical specfication
Product code:
Supply voltage:
Output voltage and amperage:
Maximum power:
Efficiency:
Temperature:
Storage temperature:
OVP (over voltage protection):
OCP (over current protection):
OPP (overpower protection):
OTP (over temperaturre protection):
SCP (short circuit protection):
IP Rating:
Compilance with standards:
REACH compatibility:
EAN code:
Product manufacturer:
energy grid
WARNING!
Make sure that the cables are not live.
:
AK-L2-025
110-265V , 50/60Hz
12V / 2A
5-50ºC
-40/+80ºC
CE, FCC, RoHS
5901720135025
Ropla Computers sp. z o.o.
ul. Wrocławska 1c
52-200 Suchy Dwór
25W
80%
Yes
Yes
Yes
Yes
Yes
IP20
YES
p. 4