DOREMIDI MTC-10 Instructions - Page 3

Parcourez en ligne ou téléchargez le pdf Instructions pour {nom_de_la_catégorie} DOREMIDI MTC-10. DOREMIDI MTC-10 5 pages.

3. Product Parameters

Name

Model

Size (L x W x H)

Weight

LTC Compatibility

USB Compatibility

MIDI Compatibility Compatible with all MIDI devices with MIDI standard interface

Operating Voltage

Working current

Firmware upgrade

4. Steps for usage

1. Power supply: Power MTC-10 through the USB-B interface with a voltage of 5VDC, and

the power indicator will light up after the power is supplied.

2. Connect to the computer: Connect to the computer through the USB-B interface.

3. Connect the MIDI device: Use a standard 5-Pin MIDI cable to connect the MIDI OUT of

the MTC-10 to the IN of the MIDI device, and the MIDI IN of the MTC-10 to the OUT of

the MIDI device.

4. Connect LTC devices: Use standard 3-Pin XLR cable to connect LTC OUT of MTC-10 to

LTC IN of LTC devices, and LTC IN of MTC-10 to LTC OUT of LTC devices.

5. Configure the time code input source: By clicking the SW button, switch between

different time code input sources (USB, MIDI or LTC). After determining the input source,

the other two types of interfaces will output time code. Therefore, there are 3 ways:

 USB input source: time code is input from USB, MIDI OUT will output MIDI time code,

LTC OUT will output LTC time code:

MTC-10

88*70*38mm

160g

Support 24, 25, 30DF, 30 time frame format

Compatible with Windows, Mac, iOS, Android and other systems, plug

and play, no driver installation required

5VDC, supply power to the product through the USB-B interface

40~80mA

Support firmware upgrade

USB

Description

MIDI OUT

LTC OUT