Asus A88XM-A/USB 3.1 Manuel de l'utilisateur - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Asus A88XM-A/USB 3.1. Asus A88XM-A/USB 3.1 36 pages.
Imprimer la page
7.
System panel connector (10-1 pin F_PANEL)
This connector supports several chassis‑mounted functions.
•
System power LED (2‑pin PWR_LED)
This 2‑pin connector is for the system power LED. Connect
the chassis power LED cable to this connector. The system
power LED lights up when you turn on the system power, and
blinks when the system is in sleep mode.
•
Hard disk drive activity LED (2‑pin HDD_LED)
This 2‑pin connector is for the HDD Activity LED. Connect
the HDD Activity LED cable to this connector. The HDD LED
lights up or flashes when data is read from or written to the
HDD.
•
ATX power button/soft‑off button (2‑pin PWR_BTN)
This connector is for the system power button.
•
Reset button (2‑pin RESET)
This 2-pin connector is for the chassis-mounted reset button
for system reboot without turning off the system power.
8.
USB 2.0 connector (10-1 pin USB34, USB56)
This connector is for USB 2.0 ports. Connect the USB
module cable to any of this connector, then install the module
to a slot opening at the back of the system chassis. These
USB connectors comply with USB 2.0 specifications and
supports up to 480Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so
will damage the motherboard!
9.
USB 3.0 connector (20-1 pin USB3_34)
This connector allows you to connect a USB 3.0
module for additional USB 3.0 front or rear panel
ports. With an installed USB 3.0 module, you can
enjoy all the benefits of USB 3.0 including faster
data transfer speeds of up to 5Gbps, faster charging
time for USB‑chargeable devices, optimized power
efficiency and backward compatibility with USB 2.0.
1‑4
F_PANEL
+PWR LED
PIN 1
+HDD_LED
USB3456
PIN 1
USB3_34
GND
IntA_P2_D+
IntA_P1_D+
IntA_P2_D-
IntA_P1_D-
GND
GND
IntA_P2_SSTX+
IntA_P1_SSTX+
IntA_P2_SSTX-
IntA_P1_SSTX-
GND
GND
IntA_P2_SSRX+
IntA_P1_SSRX+
IntA_P2_SSRX-
IntA_P1_SSRX-
USB3+5V
USB3+5V
PIN 1
Chapter 1: Product introduction
PWR BTN
RESET