DAESAN DHL-H3 Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DAESAN DHL-H3. DAESAN DHL-H3 12 pages. Led hydroponics
Également pour DAESAN DHL-H3 : Manuel de l'utilisateur (12 pages)

Imprimer la page
How to Use Nutrient Tank
How to Fill Water
in the Nutrient Tank
How to Dilute
Hydroponic Fertilizer A & B
with Water
[LIGHT]
- OFF : Turn off LED lamps
LED
- 10 :
Lamp
- 12 :
Auto
- ON : Turn on LED lamps
Control
Outside
Outside
Temperature
Temperature
Display Function
Display
☞ Displays 10 to 30 °C
[PUMP]
- OFF : Stop circulating nutrient solution
Water
- 10 : Circulating nutrient solution for 10 min.(supply 10min/hour)
Auto
- 30 : Circulating nutrient solution for 30 min.(supply 30min/hour)
Control
- ON : Circulate nutrient solution continuously
1. Select the proper place to install and complete installation.
2. Fix water pump at the bottom of inside of nutrient tank.
3. Fill water in the tank up to its max. 12ℓ, and turn on
the electric power.
4. Set "10" in
the waterways and check if there is any leakage or not.
5. If not, dilute hydroponic fertilizer with water in the nutrient tank.
1. Fill each bottle for hydroponic fertilizer A & B with
200㎖ of water respectively and dilute them.
2. Use a syringe enclosed to fill up each 12㎖ of A & B.
3. Add them and 12ℓ of water in nutrient tank.
4. And dilute again.
Lighting for 10 hours (10 hours on and 14 hours off)
Lighting for 12 hours (12 hours on and 12 hours off)
[PUMP]
function, make water go through
5
Alarm Function
☞ Warning sound and lamp
for the shortage of
nutrient solution