daewon DIB-N850R Manuel de l'utilisateur - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} daewon DIB-N850R. daewon DIB-N850R 20 pages.

Imprimer la page

Maintenance

※ Dual protection (dryer inner cover and closed nozzle cover) protects the

bidet seat from contamination and water damage.

Cleaning the screen filter

Turn off the water supply and hold the toilet flush

lever down to empty the tank completely.

Unplug the bidet seat, remove from the toilet and

disconnect the bidet hose. You may use the bucket

to catch any dripping water from the hose and bidet

seat.

Remove the screen filter from the water inlet with a

long-nosed pliers.

Clean the filter with a toothbrush and re-install it

correctly.

Reconnect the bidet hose and place the bidet seat

back, Plug the power cord back and turn the water

supply back on. Check for leaks.

Cleaning bidet seat body

Do not use thinner, benzene, acidic chemicals,

chloride, or hydrochloric acid detergent.

Do not scrub or use harsh, abrasive products to

clean the seat.

Use a soft, damp cloth and mild cleanser and do not

spray water excessively onto the bidet seat.

If the contamination is serious, use the mild

detergent (such as dish soap) only and make sure

there is no residue after cleaning.

Do not use any aerosol(spray) products nearby. This

may result in discoloration of the bidet body.

Unplug first before cleansing, and be aware of not

wetting the power plug.

Be careful of not to drop any chemical detergents

of toilet cleanser on the water supply hose or power

plug.

Maintenance

기본기능

Cleaning the bottom and toilet bowl

Unplug and shut the water supply off, then flush

toilet and hold down dandle to completely empty

tank.

Disconnect water supply hose from the bidet seat.

You use a bucket to catch any dripping water from

the bidet and hose.

Press the bidet release lever and gently pull inward

to remove the bidet seat.

Use a soft, damp cloth and mild/neutral cleanser

(such as dish soap) to wipe down the bidet body and

remove the cleanser completely.

In case of cleaning the toilet, remove the catch plate

first. Make sure there is no cleanser left on the toilet

after cleaning. Cleanser residue may damage the

bidet body.

Product storage

Keep the unit plugged in to prevent freezing if the

bidet seat is installed in a cold place.

When the bidet seat is not used for an extended

period of time, unplug. When it is reused after it is

stored in a cold place, keep the unit in a warm place

for a while before plugging in.