bolid S2000-BI Rev.02 Manuel d'instruction

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} bolid S2000-BI Rev.02. bolid S2000-BI Rev.02 14 pages. Indicator module

Imprimer la page

1.1

General

1.1.1 S2000-BI / S2000-BI Rev.02 Indicator Module (hereinafter referred to as the module) is

designed to operate as a part of an Orion integrated security system under the network controller

(S2000M control panel or Orion Pro Software Suite) together with control and indicating equipment

Signal-10, Signal-20, Signal-20M, Signal-20P Rev.01, Signal-20P SMD, S2000-4, or S2000-KDL

polling loop controller. To be part of a modular control and indicating device the module shall be

used only with an S2000M control panel of versions 3.00+.

1.1.2 The module provides light and sound indication of conditions of partitions (zones). The

module is to be installed inside protected premises and is intended for round-the-clock operation.

1.1.3 For monitoring a fire alarm system use the Fire Alarm indication type, and for

monitoring fire-fighting equipment use the Operated Appliance indication type.

1.1.4 The module is not intended to be operated in aggressive and dusty environments and in

ex-hazardous premises.

1.2

Specifications

Light Indication

Built-in Buzzer

Tamper Switch

RS-485 Port

(to operate as part of an Orion ISS)

Power Voltage

Consumed Power

Consumed Current

Alarm mode

Quiescent mode (all LEDs are off)

Pre-operation Time

Weight

Programming

External Reader

Content of precious materials: not subject to inventory accounting in case of storage, disposal

and recycling.

1.3

Standard Delivery

1) S2000-BI (S2000-BI Rev.02) Indicator Module

2) Instruction Manual

3) Woodscrew 1-3×25.016 GOST 1144-80 with Wall Plug 6х30

4) Package

INDICATOR MODULE

S2000-BI, S2000-BI Rev.02

INSTRUCTION MANUAL

TECHNICAL INFORMATION

- 60 two-color LEDs to indicate conditions of up to

60 partitions of Orion ISS

- 8 single-color LEDs to display alarms and troubles

in Orion ISS

- One LED to indicate the module conditions

- One LED to show that a sound is silenced

- One LED to show whether or not operating by

iButton is permitted

- Yes

- 10.2 – 28.4 VDC.

Bolid manufactured battery backed power supplies

of RIP-12 and RIP-24 series are advised to be used

- 3 W max

- 200 mA max at 12 VDC

- 100 mA max at 24 VDC

- 50 mA max at 12 VDC

- 50 mA max at 24 VDC

- 2 s max

- 0.6 kg max

- By means of UProg.exe

- One iButton reader can be connected to

– 1 pc.

– 1 copy

– 3 pcs.

– 1 pc.