bolid S2000-USB Manuel d'instruction - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} bolid S2000-USB. bolid S2000-USB 6 pages. Usb / rs-485 interface converter

Imprimer la page

2.3 Operation of the Device

2.3.1 If the S2000-USB is the first or the last (end) device within the RS-485 interface

bus then the termination resistor of 120

on the contacts which are located near the RS-485 terminal block. Otherwise, the jumper should

be put off.

2.3.2 After defining the jumper position and connecting required wires the S2000-USB

can be connected to a personal computer. READY indicator shall flash; it means that the S2000-

USB is not initialized on the PC.

2.3.3 The S2000-USB to operate on your PC you should install the S2000-USB driver on

the PC. To do so, select 'S2000-USB Driver' in the Program Setup section on the provided

Bolid Information CD and follow the instructions.

2.3.4 After first connecting the S2000-USB to a PC the Found New Hardware Wizard

window will appear on the display. Following is the description of driver setup process for

Windows XP operating system:

•

Select 'No, not this time' and click Next:

•

Then, select 'Install from a list of specific location' and click Next:

should be brought in the line by putting on the jumper