Canon 7215 - LV XGA LCD Projector Spécifications - Page 22
Parcourez en ligne ou téléchargez le pdf Spécifications pour {nom_de_la_catégorie} Canon 7215 - LV XGA LCD Projector. Canon 7215 - LV XGA LCD Projector 47 pages. Mounting hanger for low ceilings
Également pour Canon 7215 - LV XGA LCD Projector : Spécifications (22 pages), Manuel d'assemblage et d'installation (japonais) (8 pages)
Imprimer la page
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
8.6.2
CF_AVDLINECOMMAND
COMMAND
"CF_AVDLINE_%1" [CR]
"UP"............Current Setting+1
%1
"DN"............Current Setting-1
Set AV service MODE vertical resolution value.
(Only valid when it is in the usual Power ON status.)
Details
The setting value is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
When there is no signal, the projector returns "101" [CR].
Acceptable
Response
Unacceptable
8.6.3
CF_AVHPOS COMMAND
COMMAND
"CF_AVHPOS_%1" [CR]
"UP"............Current Setting+1
%1
"DN"............Current Setting-1
Set AV service MODE horizontal position value.
(Only valid when it is in the usual Power ON status.)
Details
The setting value is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
When there is no signal, the projector returns "101" [CR].
Acceptable
Response
Unacceptable
8.6.4
CF_AVVPOS COMMAND
COMMAND
"CF_AVVPOS_%1" [CR]
"UP"............Current Setting+1
%1
"DN"............Current Setting-1
Set AV service MODE vertical position value.
(Only valid when it is in the usual Power ON status.)
Details
The setting value is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
When there is no signal, the projector returns "101" [CR].
Acceptable
Response
Unacceptable
8.6.5
CF_AVSERV COMMAND
COMMAND
"CF_AVSERV_%1" [CR]
%1
"RST"
Set AV horizontal/vertical resolution that is set in such as "CF_A Ｖ
DDOTS"/"CF_AＶＤＬＩＮＥ" to default setting value.
(Only valid when it is in the usual Power ON status.)
Details
The setting value is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
When there is no signal, the projector returns "101" [CR].
"000" [CR]
"101" [CR] ----Input-VIDEO
"000" [CR]
"101" [CR] ----Input S-VIDEO
"000" [CR]
"101" [CR] ----Input-VIDEO
Page
22