Canon LV-8235 UST Spécifications - Page 17

Parcourez en ligne ou téléchargez le pdf Spécifications pour {nom_de_la_catégorie} Canon LV-8235 UST. Canon LV-8235 UST 26 pages. Ultra-short throw wxga networkable projector, with built-in speaker and 3d ready
Également pour Canon LV-8235 UST : Manuel d'assemblage et d'installation (36 pages), Spécifications (3 pages)

Imprimer la page
Canon LV-8235 UST Spécifications

6.33. IMAGE (Toggle) Command

Command
"C27"[CR]
Switch Image Setting status.
Detail
This command works the same as "IMAGE" button of the remote control.
Acceptable
Response
Unacceptable

6.34. Direct on Setting Command

Command
"C28" [CR]
Enable Direct power on.
Detail
This status is stored in EEPROM and retained regardless of Power OFF/ON.
Acceptable
Response
Unacceptable

6.35. Direct on Cancel Command

Command
"C29" [CR]
Disable Direct power on.
Detail
This status is stored in EEPROM and retained regardless of Power OFF/ON.
Acceptable
Response
Unacceptable

6.36. Power Management Ready Command

Command
"C2A" [CR]
Set Power Management mode to Standby mode.
Detail
This status is stored in EEPROM and retained regardless of Power ON/OFF.
Acceptable
Response
Unacceptable

6.37. Power Management OFF Command

Command
"C2B" [CR]
Set Power Management mode to OFF mode.
Detail
This status is stored in EEPROM and retained regardless of Power ON/OFF.
Acceptable
Response
Unacceptable

6.38. Power Management Shut down Command

Command
"C2E" [CR]
Set Power Management mode to Exit mode.
Detail
This status is stored in EEPROM and retained regardless of Power OFF/ON.
Acceptable
Response
Unacceptable
LV-8235 UST Basic Serial Command Specifications
[ACK] [CR]
" "[CR]
[ACK] [CR]
" "[CR]
[ACK] [CR]
" "[CR]
[ACK] [CR]
" "[CR]
[ACK] [CR]
" "[CR]
[ACK] [CR]
" "[CR]
-14-