Canon REALiS SX80 Mark II D Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Canon REALiS SX80 Mark II D. Canon REALiS SX80 Mark II D 25 pages. Projector
Également pour Canon REALiS SX80 Mark II D : Manuel du produit (12 pages), Manuel du produit (13 pages), Brochure & Specs (12 pages), Manuel complémentaire (10 pages), Brochure & Specs (12 pages), Brochure & Specs (4 pages), Manuel du produit (18 pages), Caractéristiques (19 pages), Manuel de l'utilisateur (1 pages), Manuel du produit (10 pages), Brochure (27 pages), Questions fréquemment posées (1 pages), Spécification du produit (2 pages), Manuel de l'utilisateur (2 pages), Brochure (2 pages), Brochure (32 pages), Brochure & Specs (12 pages), Brochure & Specs (12 pages), Caractéristiques et spécifications (3 pages)

C14

Configuring the Network Settings of the Software

When installation of this software is complete, run the software and configure the discovery

settings of the network for discovery.

1.4.1

Click the Windows [Start] menu and select [All Programs], followed by

[Projector Monitoring Software] and [Projector Monitoring Software].

Main screen of this software will display.

1.4.2

Configure the network range for discovering projectors. Methods vary depending on "SNMP

V1/V2c/V3" and "LV Series". Configure each protocols respectively.

■

For SNMP V1/V2c/V3

When using "SNMP V1" / "SNMP V2c" / "SNMP V3", you can specify a broadcast address or

IP address range for discovery. Select a protocol type and configure the range for discovery.

Configure SNMP V1/V2c/V3 with the following procedures. Configuration can be done with

the same procedures. SNMP V3 is used in this example.

From [Discovery settings] of the [Option] menu, select a name of protocol

([SNMP V1] / [SNMP V2c] / [SNMP V3]) to configure.

[Discovery settings] dialog will display.

Place a checkmark in [Enable (Protocol Name)].

Remove a checkmark if protocol is not used for discovery.

CHAPTER 1 • Introduction