Canon WUX500ST Manuel - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Canon WUX500ST. Canon WUX500ST 19 pages.
Imprimer la page
4. Accessories
Main supplied
accessories
Optional
accessories
Replacement
parts
*1: Maximum distance for using the remote controller from the front is limited to 4 meters/13 feet as
a part of the remote receptor on the front side will be covered by the projector lens.
*2: Computer cable is not equipped in some models.
*3: Only use the attachment dedicated for the WUX500ST as the size and the weight will vary
among products. Consult a professional installer before attempting to mount the projector to a
ceiling.
*4: Uses a commercially available audio cable (3.5Ф stereo mini-plug) for cable connection.
*5: When the lamp has a 50% survival rate and can maintain a 50% light retention ratio. This value
does not guarantee the lamp life.
WUX500ST (12/18)
Remote Control
RS-RC06
(*2)
Computer cable
Power cord
Ceiling Attachment
RS-CL16
Ceiling Pipe 400 – 600 mm
RS-CL08
Ceiling Pipe 600 – 1000 mm
RS-CL09
Option Foot
RS-FT01
Remote Control
RS-RC05
Lamp Assembly
RS-LP08
Replacement Air Filter
RS-FL02
Power supply: DC 3.0V (with two AAA
batteries)
Communication range: approx. 8 m
±25 degrees of the receiver
mini Dsub15-mini Dsub15
This is used for connection with computer.
The cable transmits analog PC signals.
Connects the projector to a power source.
This is used for ceiling mount.
The ceiling pipe is used as a projector ceiling
extension when installing the projector away
from the ceiling. It is compatible with Canon
ceiling attachments.
The ceiling pipe is used as a projector ceiling
extension when installing the projector away
from the ceiling. It is compatible with Canon
ceiling attachments.
Attached to 4 points on the top side when the
projector is installed upside down.
Attached to 2 points on the rear end of the
projector bottom to adjust the inclination when
it is installed right side up.
Power supply: DC 3.0V (with two AA batteries)
Communication range: approx. 8 m within ±25
degrees of the receiver
Capable of wired connection
250-NSHA
Recommended lamp replacement time
3000H (5000H in silent/low mode)
This filter is installed at the air intake to
prevent dust from entering.
(*1)
within
(*3)
(*4)
(*5)