Canon WUX7500 Manuel - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Canon WUX7500. Canon WUX7500 29 pages. Lcos projector

・ Modes of NMPJ

Four modes are available. Each mode is different in the number of computers and projectors that can

be connected and the functions that can be used.

Direct

Meeting

Classroom

Broadcast

・ Version of NMPJ

Because there are different versions, check the NMPJ manual for compatibility issues.

●Precautions when inputting analog PC signals.

If inputting analog PC signals, it is necessary to take the following precautions.

①This product does not support image signals with a dot clock of over 162MHz due to hardware

restrictions.

②Normally, image output equipment, such as computers, automatically read the EDID information from

the projector, and output image signals that can be displayed by the projector.

③However, depending on the cable that is used, there may be cases where conduction lines for

communicating EDID information are not installed in the cable.

The following is the pin layout for a Dsub15 connector.

A cable with conduction lines for Nos. 9, 12, and 15 is necessary.

Unless there are conductions lines for these pins, the image output equipment will not be able to obtain

EDID information from the projector, and will output image signals that cannot be displayed by the

projector.

④Even if a 5BNC cable is used, EDID information is not communicated, and settings must be specified on

the output equipment side so that image signals that can be displayed by this product are output.

(14/28)

Mode