Dormakaba TS9356 PKT 120/170 Manuel d'instructions d'installation - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Dormakaba TS9356 PKT 120/170. Dormakaba TS9356 PKT 120/170 9 pages. Surface applied closer pocket door track mount in 120/170 pocket
Imprimer la page
dormakaba TS9356 PKT 120/170 (Closer on door)
Installation Instructions
1 Technical specifications
1.1
Overview
Caution: sex nuts are required for attachment of
components to unreinforced doors and to wood
or plastic faced composite type fire doors, unless
an alternative method is identified in the
individual door
manufacturer's listings.
Maximum degree of opening is 170°.
Minimum door width is 32".
Adjust closer spring tension for proper closing
and latching of door.
Adequate reinforcement by others required to
install track in pocket.
Pocket depth is measured from the pull side face
of the door at maximum opening.
1.2 Size selection chart
Table 1
Closer
Door width range Maximum
TS9356 PKT 120/170
2'-8" to 4'"
1.3 Tools recommended
Table 2
Drill bits:
Metal: No. 21 & 10-32 tap
Wood: 1/8"
TS93 Surface Applied Closers
weight
150lbs
#2 Phillips screwdriver
M2.5 hex key
M5 hex key
08279971
Requires DORMA EM504 electromagnetic door
holder
Use closer body style "B" for this installation.
Arrows on closer mounting plate point upward.
Follow included template to properly prepare
door and frame for all accessories of the closer
installation.
Know the swing of the door which is being
installed prior to installation.
Make sure door efficiently operates prior to
installing closer.
Verify closer spring size prior to installation.
Technical specifications
08-2019
3