Bolton Tools CS 250 Manuel d'utilisation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Bolton Tools CS 250. Bolton Tools CS 250 20 pages.
Imprimer la pagefused away at the flank of the saw tooth. This causes the saw to be slightly thicker at
certain places. Remove the saw blade and remove the fused material with a
fine-grained, high-grade saw file. Selection of the tooth form.
Besides a well selected pitch the following factors, too, are of great importance to
facilitate the correct machining of the material (fig. 5.02):
Clearance angle ß and rake angle y of the tooth have been selected correctly in view
of the material to be sawn. the principle is as follows.
Material
Steel
Stainless steel
Non-ferrous
Clearance angle
8
6
12
5
Rake angle
22°
15°
25°