Bolton Tools FS-5216 Manuel d'utilisation - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Bolton Tools FS-5216. Bolton Tools FS-5216 7 pages. 52" sheet metal foot shear
Imprimer la page1. PRIOR TO INSTALLATION AND OPERATION
Read the following instruction carefully and thoroughly will ensure
your machine in perfect function and avoid possible dangers.
2. RECEIVING AND UNPACKING
On receiving your machine, examine if the other packing is in good
condition, Then, remove the cover to inspect whether there is any damage
or loss caused during transportation, If any is found, please immediately
notify the transportation any your supplier, Some parts and the
accessories are knocked down and in bulk packing to save transportation
space. You must check those parts and accessories in extra care. Then,
assemble them on to the machine according to the illustrations.
3. INSTALLATION
Be sure to install your shear on a solid lever floor. The work area
should he well lighted to prevent any wrong or danger in operation.
Fix the machine on to the floor with anchor bolts to prevent from
vibration. Place a precision level on the table surface to level the machine
in all direction. Insert metal shims between floor and the shear mounting
surface to adjust the level. Tighten all of the bolts after those being
adjusted.
4. CAUTIONS
The knives are sharp. Take extra care in operating, Keep hands away
from the reach of blade.