Advance acoustic SC100 Manuels d'utilisation - Page 2
Parcourez en ligne ou téléchargez le pdf Manuels d'utilisation pour {nom_de_la_catégorie} Advance acoustic SC100. Advance acoustic SC100 2 pages.
Également pour Advance acoustic SC100 : Manuels d'utilisation (2 pages)
Imprimer la pageATTENTION! Do not use the machine before you have read and understood the Instructions for Use Manual.
The machine
doesn't work
as it should?
1. Check if the power supply cable is
damaged, faulty or disconnected
from the electrical mains.
The suction
doesn't work
as it should?
1. If applicable, check if the manual
suction hose connection is turned
to "OFF".
The machine
doesn't clean
as it should?
1. Check if you have selected the right
solution settings or the solution
tank is empty.
The brush
doesn't work
as it should?
1. Check if the cylindrical brush is
correctly installed and not worn out.
Replace when necessary.
9435 Winnetka Avenue North
240 Superior Boulevard
Brooklyn Park, MN 55445
Mississauga, Ontario, Canada L5T 2L2
www.advance-us.com
www.nilfisk-advance.ca
Phone 800-850-5559
Phone 800-668-8400
Fax 800-989-6566
Fax 800-263-5111
All manuals and user guides at all-guides.com
TROUBLESHOOTING
SC100
2. The main switch is broken. (*)
2. Check if the recovery tank is full.
2. Check if the solution filter is dirty.
Clean it if needed.
™
(*) For these causes the maintenance
procedure must be performed by an
authorized Advance Service Center.
3. The push button panel is broken. (*)
For further information refer to the
Service Manual, available at any
Advance Service Center.
3. Check if the squeegee bars are
4. Check if the inspection compartment
dirty or the blades are worn or
damaged.
3. Check if the holes in solution
dispensers are clogged. Remove
them and clean if needed.
is dirty. Check if the recovery vacuum
hose is disconnected or dirty.