Advance Appliances ETS 160 Manuel d'installation et d'utilisation - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Advance Appliances ETS 160. Advance Appliances ETS 160 8 pages. Advance electric thermal store
Imprimer la page
947219 ADVANCE APPLIANCES 8pp A5_Layout 1 10/11/2015 14:41 Page 6
WARRANTY
Warranty is for ten years on the tank against failure due to manufacturing fault,
and two years on components supplied and fitted to the heating manifold and
thermal store.
Conditions apply, the unit must be serviced annually and a record of service
must be maintained. It must be in a frost free environment and must be used
for public mains potable water only. It must be installed and used correctly
in accordance with manufacturer's requirements and current best practice.
Corrosion and scale are not covered. Chlorine/chloride levels must be below
200ppm. The store must be inhibited to correct dose.
Scale is not covered
Your
statutory rights are not affected by the above.
COMPONENT LIST
Component
3 kw immersion heater (high temp)
Control thermostat for above (high temp)
High limit thermostat for above
Blending valve
Expansion vessel 2 litre
Float switch and motorised valve kit
TECHNICAL DATA
CAPACITY
WEIGHT
160 ltrs
HEAT LOSS : 56 WATTS
Only use authorised replacement components.
DISPOSAL
At the end of the life of the product please dispose of in line with any
regulations ruling at the time
IMM
FULL Kg
HEATERS
230
2 x 3Kw
CLASS : D
Reference
AA 0005
AA 0007
AA 0006
AA 0002
AA 0001
AA 0300
HGT X
HOT WATER
DIA
COIL M
585 x 1450
1.5m
OFF PEAK USE
HW COIL
2
OUTPUT
35 Kw