batusan PN 16 Mode d'emploi - Page 2
Parcourez en ligne ou téléchargez le pdf Mode d'emploi pour {nom_de_la_catégorie} batusan PN 16. batusan PN 16 2 pages.
Imprimer la page- The strainer to be mounted on the installation should be mounted considering the flange side, where the
3.
POINTS TO BE CONSIDERED WHEN USING A STRAINER:
3.1.
Unpack the valve when you intend to connect it to the installation only.
3.2.
Operating conditions are indicated on the valve as maximum operating pressure /BAR.
3.3.
In certain periods, the stopper installed on the strainer cover should be dismantled and the filter should be cleaned.
3.4.
While connecting the strainer to the installation, please ensure that the direction arrow should be in flow direction.
4.
TOOLS AND MATERIALS TO BE USED
4.1.
Two-outlet switch, bolt and bolt pin suitable for connection
5.
CONCLUSION:
If your installation is intended to operate safely, installing strainers (filtres) to the main circuits will absolutely decrease the
operational expenses.
The STRAINER, which we have connected to the installation, should be operated according to the measurement and
operating pressure, which is indicated on itself, so as to eliminate the possible leakages and operational expenses.
technical specifications are indicated, will be the inlet part. Afterwards, the other side will be mounted on
the installation so as to eliminate the possibility of pulling tension.
CONNECTION BOLTS USED IN FLANGES
Tailed Flange in
VALVE
accordance with
DIAMETER
DN 10
50
DN 15
50
DN 20
50
DN 25
50
DN 32
50
DN 40
55
DN 50
55
DN 65
55
DN 80
60
DN 100
60
DN 125
65
DN 150
70
DN 200
75
L
PN 16
DIN 2633
L
Ø d
12
12
12
12
16
16
16
16
16
16
16
20
20
PN 40
Tailed Flange in
accordance with
DIN 2635
L
Ø d
50
12
50
12
50
12
50
12
55
16
55
16
60
16
65
16
65
16
75
20
80
24
85
24
90
27
Page 1 of 2