Asus Z91N Manuel rapide - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel rapide pour {nom_de_la_catégorie} Asus Z91N. Asus Z91N 9 pages.

5. Use a "Slot head" screw driver to turn the CPU locking screw on the CPU socket 180

degree counter clockwise to unlock position.

6. Now you are ready to install the CPU. Do not touch the CPU pins directly with fingers.

Use a suction tool to handle the CPU if possible. Or else, only handle the CPU by the

edge of PCB.

7. Make sure the surface of the CPU is clean and shinny. This is very important

especially using one CPU which has been installed and having thermal grease residual

on top of the chip. Remove all residuals in this case.

8. Drop the CPU into the socket with the pin 1 of CPU sitting in pin 1 of the socket.

PIN 1

9. Make sure the CPU is sitting properly by slightly rocking it, then lock the CPU locking

screw on the socket by turning it 180 degree clockwise.

unlock

lock