Daewoo electricals HEA1187 Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Daewoo electricals HEA1187. Daewoo electricals HEA1187 8 pages. Mini convector heater

Imprimer la page
Daewoo electricals HEA1187 Manuel
Wall Mounting Your Mini Convector
Before wall mounting your Mini Convector, please be aware of the minimum
distances from the walls, ceiling and floor as shown below:
Wall
Once the desired mounting position has been chosen, fasten the mounting
bracket to the wall as follows.
WARNING
Before drilling the wall, ensure that there are no hidden mains
cables or water pipes in the area to be drilled - do not install the appliance
directly below an electrical socket.
Important: this heater must either be wall mounted or have the feet fitted
as described in this manual – under no circumstances should heater be
operated standing directly on the floor or other surface.
1. Remove the bracket from the heater.
2. Draw a horizontal line on the wall in the desired mounting position. Mark two
points 150mm apart along the line where the centre of the screw holes will
be.
3. Use the wall plugs and fixing screws supplied to fix the bracket to the wall.
4. Use a spirit level to ensure that the mounting bracket is fixed horizontally,
adjust the bracket if necessary.
150mm
Screw hole centres
Ceiling
Heater
Wall
Floor
Horizontal Line