Asus MM17D Manuel - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Asus MM17D. Asus MM17D 18 pages. 43.2cm(17”) tft color lcd monitor
Également pour Asus MM17D : Manuel (18 pages)

Imprimer la page

PLUG AND PLAY

Plug & Play DDC2B Feature

This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC

STANDARD. It allows the monitor to inform the host system of its identity and, depending on

the level of DDC used, communicate additional information about its display capabilities.

The DDC2B is a bidirectional data channel based on the I²C protocol. The host can request

EDID information over the DDC2B channel.

THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO

INPUT SIGNAL. TO OPERATE PROPERLY, THERE MUST BE VIDEO INPUT SIGNAL.

This monitor meets the Green monitor standards as set by the Video Electronics Standards

Association (VESA) and/or the United States Environmental Protection Agency (EPA) and

The Swedish Confederation Employees (NUTEK). This feature is designed to conserve

electrical energy by reducing power consumption when there is no video-input signal present.

When there is no video input signal this monitor, following a time-out period, will automatically

switch to an OFF mode. This reduces the monitor's internal power supply consumption. After

the video input signal is restored, full power is restored and the display is automatically

redrawn. The appearance is similar to a "Screen Saver" feature except the display is

completely off. The display is restored by pressing a key on the keyboard, or clicking the

mouse.

USING THE RIGHT POWER CORD :

The accessory power cord for the Northern American region is the wallet plug with NEMA 5-

15 style and is UL listed and CSA labeled. The voltage rating for the power cord shall be 125

volts AC.

Supplied with units are intended for connection to power outlet of personal computer: Please

use a cord set consisting of a minimum No. 18 AWG, type SJT or SVT three conductors

flexible cord. One end terminates with a grounding type attachment plug, rated 10A, 250V,

CEE-22 male configuration. The other end terminates with a molded-on type connector body,

female configuration.

rated 10A, 250V, having standard CEE-22

Please note that power supply cord needs to use VDE 0602, 0625, 0821 approval power cord

in European counties.