Daheng Imaging MARS-5G-P Manuel rapide - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel rapide pour {nom_de_la_catégorie} Daheng Imaging MARS-5G-P. Daheng Imaging MARS-5G-P 3 pages.
Imprimer la page
Pin
1
2
3
4
5
6
7
8
9
10
11
12
The polarity of power and GPIO cannot be reversed, otherwise, camera or other peripherals could burn out.
■
Connecting the camera
After the camera is connected properly, the LED on the back panel
of the camera shows green continuous, it indicates that the camera
has been ready for acquiring images or other operations.
■
IP Configuration
(USB3.0 interface camera does not require IP configuration)
If the camera is first used, Please run the GigE IP Configurator tool
GigE IP Configurator" or "Start\All Programs\Daheng Galaxy Devices\GigE IP Configurator"
The camera's IP address, configuration modes, and the user-defined name of the cameras can be modified
in the software.
■
Running the Acquisition program
Run the Demo (demonstration program). You can open the demo
Daheng Galaxy Viewer" or "Start\ All Programs\Daheng Galaxy Devices\Daheng Galaxy Viewer"
In the Demo, you can adjust the cameras' parameters, acquire and save images.
III. I/O Port
Definition
Color
Line0+
Green
GND
Blue
Line0-
Gray
POWER_IN
Purple
Line2
Orange
Line3
Pink
Line1-
White green
Line1+
White blue
NC1
White gray
GND
White purple
NC2
White orange
NC3
White pink
IV. Running the Acquisition Program
Description
Opto-isolated input +
PWR GND & GPIO GND
Opto-isolated input -
Camera external power,
+12V DC~+24V DC
(
USB3.0 interface camera does not connect pin4)
GPIO input/output
GPIO input/output
Opto-isolated output -
Opto-isolated output +
Not Connected, reserved
PWR GND & GPIO GND
Not Connected, reserved
Not Connected, reserved
by the following ways: "Desktop\
by the following ways: "Desktop\