Dotronix M SERIES Manuel de l'utilisateur - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dotronix M SERIES. Dotronix M SERIES 12 pages. Handheld addressable remote controls

Imprimer la page

CUSTOM OPTIONS

SETTING THE CLOCK

To set the clock, first it is necassary to enter the security code and unit

number, refer to GETTING STARTED earlier in this manual for the

procedures to enter the security code and unit number.

Then press and hold the 7 (seven) key until the following screen

appears (typically 6-8 seconds).

KEY NEW PURITY GUARD TIME

THEN PRESS ENTER KEY.

The time displayed is the current time and may be any value from 00:00

to 23:59. Notice that the time is in 24 hour format.

To accept the current time, press the ENTER key.

To change the time, key in the new time.. Notice that as the numbers are

keyed in they move from left to right until all four digits have been

entered.

Some digits are not accepted. For example, numbers larger than 2 that

will be in the first digit position are not accepted, numbers larger than 4

are not excepted in for the second digit and numbers larger than 5 are

not accepted for the third digit.

If the entered time is not the desired time, key in the desired number

again (and again if necassary) until the displayed time is correct. Then

press the ENTER key.

Pressing ENTER key saves the numbers.

After pressing the ENTER key, the on screen display is erased until

another selection is made via the remote control.

_4:25

CUSTOM OPTIONS

PROGRAMMING PURITY GUARD TIMER

Purity Guard activates the Degauss function and on units with HarcPlus,

the automatic color balance feature of the monitor, once each 24 hour

period. Degauss compensates for the effects of stray magnetic fields

including the earth's field, from affecting the quality of the picture pre-

sented by the monitor. See Automatic Color Balance for a description.

Degauss is activated at power up which is sufficient for monitors that are

powered down at least once each day. For units that operate continu-

ously, it is recommended that the degauss circuit be operated at a

selected time each day. Purity Guard provides the timer and selection of

time for the degauss function.

As shipped from the factory, Purity Guard is not active. To activate

Purity Guard, select Purity Guard on the selection menu and press the

right arrow key until the word "ENABLED" appears. If Purity Guard is

disabled, the timer can be programmed as described below, but the

degauss action will not occur until Purity Guard is activated.

To set the Purity Guard time, first it is necessary to enter the security

code and unit number, refer to GETTING STARTED earlier in this

manual for the procedures to enter the security code and unit number.

Then press and hold the 9 (nine) key until the following screen

appears (typically 6 – 8 seconds).

KEY NEW PURITY GUARD TIME

THEN PRESS ENTER KEY.

The time displayed is the current Purity Guard time and may be any value

from 00:00 to 23:59. Notice that the time is in 24 hour format.

To accept the current time, press the ENTER key

_4:25