Double Horse 9116 Manuel technique - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel technique pour {nom_de_la_catégorie} Double Horse 9116. Double Horse 9116 8 pages.

DH9116 Swashplate to Servo Arm Adjustable Linkage - Original

Factory Lengths

Factory lengths for both servo linkages. To increase in length, turn clockwise (left). To decrease in length, turn

anti or counter-clockwise (right).

The longest linkage with the outside (O.D) points of a digital vernier caliper should be 36mm (exactly

36.61mm), and with the inside (I.D) points of a digital vernier caliper the total overall length is 42mm (exactly

41.59mm)

The shortest linkage with the outside (O.D) points of a digital vernier caliper should be 26mm (exactly

26.32mm), and with the inside (I.D) points of a digital vernier caliper the total overall length is 32mm (exactly

31.21mm).

These lengths are base line measurements only. With these lengths, the helicopter should hover or take off

with a drift backwards and to the slightly to the right.

Proceed to the next section, to mechanically fine adjust the servo arm linkages to get a perfect hands-free

hover.