Dahua A10169 Manuel de démarrage rapide - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Dahua A10169. Dahua A10169 16 pages.
Imprimer la page
Device initialization and IP setting can be finished with the "ConfigTool" or in web interface. For
more information, see the WEB Operation Manual.
Device initialization is available on select models, and it is required at first use and after
device is being reset.
Device initialization is available only when the IP addresses of the device (192.168.1.108
by default) and the PC stays in the same network segment.
Planning useable network segment properly to connect the device to the network.
The following figures and interfaces are for reference only, and the actual product shall
prevail.
2.1
Initializing Device
Step 1
Double-click "ConfigTool.exe" to open the tool.
Step 2
Click
The Modify IP interface is displayed. See Figure 2-1.
Step 1
Click Search setting.
The Setting interface is displayed.
Step 2
Enter the start IP and end IP of the network segment in which you want to search
devices, and then click OK.
All the devices found in the network segment are listed.
Step 3
Select one or several devices which Status are Uninitialized, and then click Initialize.
The Device initialization interface is displayed.
2
Network Configuration
.
Figure 2-1
Modify IP interface
Network Configuration 2