Doug Fleenor Design Preset12 Manuel du propriétaire - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Doug Fleenor Design Preset12. Doug Fleenor Design Preset12 11 pages.
Imprimer la page
Action upon loss of external DMX512
One of the attractions of Preset12 is the ability to sense the presence of an external
DMX512 source and back off when one is present. Upon the loss of an external DMX512
signal, Preset12 may be configured to hold the last look generated by the external source
or fade to the last look generated by Preset12 (prior to the external source taking over).
Making an "all-off" button
An option on Preset12 is the "all-off" button. Any button may be configured as all-off:
Pressing an all-off button will cancel all other presets and pressing any other preset will
cancel an all-off preset. Button 12 is recommended for this purpose as it also has the
stop-sending-dmx function.
Factory defaults:
Fade time: 2 seconds.
Lock status: Unlocked.
Main/remote: Stand-alone.
Canceling groups: All buttons grouped together.
Loss of external DMX512 action: Fade to most recent Preset12 state.
All-off function: Preset number 12.
To Return to Factory Defaults:
Enter set up mode then press button 12 followed by button 7.
This does not erase the presets.
To Enter Set Up Mode
Power down Preset12.
Press and hold buttons 1 and 7. Press buttons firmly, they are not touch sensitive.
Power up Preset12 while holding down buttons 1 and 7.
All twelve blue LEDs will begin chasing.
Release buttons 1 and 7.
To Set Canceling Groups to Predefined Options
Enter set up mode.
Press and release button 1. LEDs will stop chasing.
Press and release the button for one of the following predefined options:
1) All presets grouped together. Buttons are 'radio' buttons; only one preset may be on at
a time. This is the original Preset 10 functionality.
2) No presets grouped. Buttons are 'push-on-push-off.' Any number of presets may be
on at a time. This is the original P.O.P.O. functionality.
3) Presets 1 thru 6 are grouped, presets 7 thru 12 are grouped. One left-column preset,
and one right-column preset may be on at a time.
4) Presets 1 thru 6 are ungrouped, presets 7 thru 12 are grouped. Useful where 1 thru 6
are individual zones (down-lights, wall-wash, chandelier, podium...) and 7 thru 12 are
complete looks (dinner, a/v presentation, clean-up, classroom...).
LEDs will begin chasing.
Page 6 of 11