Dahua DH-IPC-HDBW4231FN-E2-M Manuel de démarrage rapide - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Dahua DH-IPC-HDBW4231FN-E2-M. Dahua DH-IPC-HDBW4231FN-E2-M 19 pages. Dome network camera
Également pour Dahua DH-IPC-HDBW4231FN-E2-M : Manuel de démarrage rapide (16 pages)
Imprimer la page
Device initialization and IP setting can be finished with the "ConfigTool" or on web interface. For
more information, see web operation manual.
● Device initialization is available on select models, and it is required at first-time use and after
device is being reset.
● Device initialization is available only when the IP addresses of the device (192.168.1.108 by
default) and the PC stay in the same network segment.
● Plan usable network segment properly to connect the device to the network.
● The following figures and interfaces are for reference only.
2.1 Initializing Device
Step 1
Double-click ConfigTool.exe to open the tool.
Step 2
Click
Step 3
Click Search Setting.
Step 4
Select the searching way.
● Current Segment Search (default)
Select the Current Segment Search checkbox. Enter the username in the Username
box and the password in the Password box. The system will search devices
accordingly.
● Other Segment Search
Select the Other Segment Search checkbox. Enter IP address in the Start IP box and
End IP box respectively. Enter username and password. The system will search the
devices accordingly.
● If you select the Current Segment Search checkbox and the Other Segment Search
checkbox together, the system searches for devices under both conditions.
2 Network Configuration
.
Figure 2-1 Setting
4
Quick Start Guide