Dahua F Series Manuel de démarrage rapide - Page 3

Imprimer la page

Dahua F Series Manuel de démarrage rapide

Dahua Panoramic + PTZ Network Camera Quick Start Guide

Do not dismantle the device because there is no component that can be fixed by users themselves.



Otherwise, it might cause water leakage or bad image due to unprofessional dismantling.

Please contact after-sale service to replace desiccant when it becomes green.



It is recommended to use the device together with lightning arrester to improve lightning protection

effect.

It is recommended to get the grounding holes to be grounded to enhance the reliability of the



device.

Do not directly touch the optic component CCD or CMOS. You can use the air blower to blow away



the dust or dirt on the lens surface. Please use a dry cloth wetted by alcohol to wipe away the dust

gently if necessary.



Use the dry soft cloth to clean the device. If the dust is difficult to be removed, please wipe it away

with a clean cloth wetted slightly by the mild detergent, and then use the dry cloth to clean the

device. Do not use volatile solvents like alcohol, benzene, thinner, or strong detergent with

abrasiveness, otherwise it will damage the surface coating or reduce the working performance of

the device.

When installing or using the device, do not directly touch or wipe the surface of the dome cover



because it is an optical device. If stained with dirt, use oil-free soft brush or air blower to gently

wipe it away. If stained with grease or fingerprint, use soft cloth to gently wipe the water drop or oil

and wait till it is dry, and then use oil-free cotton cloth or lens cleaning paper soaked with alcohol or

detergent to wipe from the lens center outward till it is clean.



We are not liable for any problems caused by unauthorized modification or attempted repair.

Warnings

Please modify the default password after login to avoid being stolen.



Use the standard components provided by manufacturer and make sure the device is installed and



fixed by professional engineers.



The surface of the image sensor should not be exposed to laser beam radiation in an environment

where a laser beam device is used.

Do not provide two or more power supply sources for the device, otherwise it might damage the



device.

Disclaimer



This manual is for reference only. Please refer to the actual product for more details.

Minor differences might be found in user interface, and there might be deviation between the actual



value of some data and the value provided in the manual due to the reasons such as the real

environment is not stable. Please refer to the final explanation of the company if there is any doubt

or dispute.

All the designs and software are subject to change without prior written notice. The manual will be



regularly updated according to the product upgrade without prior announcement.

Please contact the supplier or customer service if there is any problem occurred when using the



device.

Please contact the customer service for the latest procedure and supplementary documentation.



Please visit our website or contact your local service engineer for more information.