Dahua F Series Manuel de démarrage rapide - Page 12

Dahua Dome Wi-Fi Camera Quick Start Guide

the three self-tapping screws in the three plastic expansion bolts firmly. Fix

dome body on installation surface.

Step 5 Hold both sides of the rotation bracket bottom with hands, rotate horizontally

along the axis, and adjust lens horizontal direction to designated position. Hold

the LED decoration cover with hand, rotate along the vertical direction, adjust

the lens vertical direction to designated position; it is okay to loosen the fix

screws on both sides of the bracket first if it is too tight to adjust (just make it

loose, do not take it down), then adjust the lens, tighten the fix screws after

adjustment. Hold the LED decoration cover with hands, rotate horizontally along

the axis, and adjust the lens image to designated position. Range of lens:

vertical (0°～+64°), horizontal (0°～+355°), image rotation direction (0°～

+355°).

Note

When it rotates to 64° vertically, please pay attention to the image rotation direction in\

order to avoid the outer cover blocking IR light and influencing IR effect.

Disclaimer

This quick start guide is for reference only. Minor difference might be found in user



interface.

All the designs and software here are subject to change without prior written notice.



All trademarks and registered trademarks mentioned are the properties of their

respective owners.



Please visit our website or contact your local service engineer for more information.

If there is any uncertainty or controversy, please refer to our final explanation.

