Com-Power ACS-230-25W Manuel d'instruction - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Com-Power ACS-230-25W. Com-Power ACS-230-25W 15 pages.

3. Turn on Switch from the front panel as shown in picture.

Upon successful completion of self test mode, LCD screen will display the Driver 1& 2

Current/Temperature, Module Current/Temperature and System Status.

Please note that Pin, Pout, SWR and Gain will not be displayed until the amplifier sees

an input of -45dBm.

4. When the RF input is applied (in excess of -40 dBm), the front panel LCD displays

the actual measured values for Pin, Pout, SWR, and Gain. The current and

temperature status of PA and Driver is always displayed regardless of the input

state.

Distributed by: Reliant EMC LLC, +1 408 916‐5750, [email protected], www.reliantemc.com

Page 12 of 15

MANUAL_ACS-230-25W Rev. M02.15