COM-power corporation PAM-6000 Manuel d'instruction - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} COM-power corporation PAM-6000. COM-power corporation PAM-6000 10 pages. Microwave preamplifier, 1 ghz to 6 ghz, 30 db gain

Imprimer la page

Page 8 of 10

INSTRUCTION MANUAL

Preamplifier Model PAM-6000

5.3

Front and rear panel layout description

5.3.1 Front Panel

The simple panel shown in the photo below consists of BNC or N type connector for RF input

and output, power switch with LED indicator and battery low indicator. Please observe the

maximum input rating printed on front panel. When the battery low indicator turns on, the

preamplifier needs charging. For faster charging, turn off preamplifier and plug in the supplied

charging adapter. You can continue using the preamplifier powered by battery charger adapter.

If the low battery indicator will remain lit, it can be turned off by flipping the power switch off

and then on.

5.3.2 Rear Panel

The back panel shown below consists of fuse holder and charging adapter input socket. Make

sure to use only the charger adapter supplied by Com-Power to power and charge the

preamplifier. Please note input rating and polarity noted above the power socket. Replace fuse

with similar size, type and rating. Please heed the warning on the back panel. Damage caused to

the preamplifier by using an alternate adapter or wrong fuse will void warranty.

114 OLINDA DRIVE ● BREA, CALIFORNIA 92823 ● (714) 528-8800● fax (714) 528-1992 ● com-power.com

REV42114