Baumer 22079 Manuel d'installation et d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Baumer 22079. Baumer 22079 40 pages. Incremental encoder/twin encoder

Imprimer la page

General notes

1.1

Symbol guide:

Danger

Warnings of possible danger



General information for attention

Informations to ensure correct product operation

Information

Recommendation for product handling

1.2

The incremental encoder HOG 10 (HOG 10 G) is an opto electro nic precision measurement

device which must be handled with care by skilled personnel only.

1.3

The expected operating life of the device depends on the ball bearings, which are equipped with

a permanent lubrication.

1.4

The expected operating life of the earthing brush depends on the electrical current and is

usually consistent with the operating life of the ball bearings.

1.5

The storage temperature range of the device is between -15 °C and +70 °C,

1.6

The operating temperature range of the device is between -40 °C (>3072 pulses per

revolution: -25 °C, optionally with heating: -50 °C) and +100 °C (restricted in potentially

explosive environments, see section 2), measured at the housing.

1.7

Declaration of Conformity meeting to the European Council Directives.

1.8

The device is UL approved (not applicable for operation in potentially explosive atmospheres).

1.9

We grant a 2-year warranty in accordance with the regulations of the ZVEI (Central Association

of the German Electrical Industry).

1.10

The encoder may be only opened as described in this instruction. Repair or mainte-

nance work that requires opening the encoder completely must be carried out by the

manufacturer. Alterations of the device are not permitted.

1.11

In the event of queries or subsequent deliveries, the data on the device type label must be

quoted, especially the type designation and the serial number.

1.12

Encoder components are to be disposed of according to the regulations prevailing in the re-

spective country.

Warning!

Damaging the seal

MB071T2 - 11068772

on the device invalidates warranty.

Baumer_HOG10-HOG10G-T2_II_DE-EN (14A4)

General notes

