Baumer 22106 Manuel d'installation et d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Baumer 22106. Baumer 22106 36 pages. Sine encoder with support plate for a torque arm

Imprimer la page

General notes

1.1

Symbol guide:

Danger

Warnings of possible danger



General information for attention

Informations to ensure correct product operation

Information

Recommendation for product handling

1.2

The sine encoder HOGS 75 is an opto electro nic precision measurement device which must be

handled with care by skilled personnel only.

1.3

The expected operating life of the device depends on the ball bearings, which are equipped with

a permanent lubrication.

1.4

The storage temperature range of the device is between -15°C and +70°C.

1.5

The operating temperature range of the device is between -20°C and +70°C

(restricted in potentially explosive environments, see section 2),

measured at the housing.

1.6

EU-Declaration of Conformity meeting to the European Council Directives.

1.7

The device is UL approved (not applicable for operation in potentially explosive atmospheres).

1.8

We grant a 2-year warranty in accordance with the regulations of the ZVEI (Central Association

of the German Electrical Industry).

1.9

The sine encoder may be only opened as described in this instruction. Repair or main-

tenance work that requires opening the sine encoder completely must be carried out by the

manufacturer. Alterations of the device are not permitted.

1.10

In the event of queries or subsequent deliveries, the data on the device type label must be

quoted, especially the type designation and the serial number.

1.11

Encoder components are to be disposed of according to the regulations prevailing in the re-

spective country.

Warning!

Damaging the seal

MB175c - 11087595

on the device invalidates warranty.

Baumer_HOGS75-c_II_DE-EN (13A2)

General notes

