Baumer HMG 10-B-Profibus DP Manuel d'installation et d'utilisation - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Baumer HMG 10-B-Profibus DP. Baumer HMG 10-B-Profibus DP 32 pages. Absolute encoder with magnetic sensing
Imprimer la page2.2
Attention instructions for mounting and operation
)
Risk of destruction due to electrostatic charge
Electronic parts contained in the encoder are sensitive to high voltages.
» Do not touch plug contacts or electronic components.
» Protect output terminals against external voltages.
» Do not exceed max. operating voltage.
)
Risk of destruction due to mechanical overload
Rigid mounting may give rise to constraining forces.
» Never restrict the freedom of movement of the encoder. The installation instruc-
tions must be followed.
» It is essential that the specified clearances and/or angles are observed.
)
Risk of destruction due to mechanical shock
Violent shocks, e. g. due to hammer impacts, can lead to the destruction of the
sensing system.
» Never use force. Assembly is simple when correct procedure is followed.
» Use suitable puller for disassembly.
)
Risk of destruction due to contamination
Dirt penetrating inside the encoder can cause short circuits and damage the optical
sensing system.
» Absolute cleanliness must be maintained when carrying out any work on the open
terminal box.
» When dismantling, never allow lubricants to penetrate the encoder.
)
Risk of destruction due to adhesive fluids
Adhesive fluids can damage the optical sensing system and the bearings. Dismoun-
ting an encoder, secured to a shaft by adhesive may lead to the destruction of the
unit.
» Do not use adhesive fluids for fixing.
MB246EN - 11171695, 17A2, Baumer_HMG10-ProfibusDP_II_EN
SAFETy AND ATTENTION INSTRUCTIONS
4/29