Baumer HOG 86 M Manuel d'installation et d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Baumer HOG 86 M. Baumer HOG 86 M 36 pages. Incremental encoder with clamping element and insert nut
Également pour Baumer HOG 86 M : Manuel d'installation et d'utilisation (44 pages), Manuel d'installation et d'utilisation (28 pages), Instructions de montage et d'utilisation (40 pages), Instructions de montage et d'utilisation (32 pages)

General notes

1.1

Symbol guide:

Danger

Warnings of possible danger

General information for attention

Informations to ensure correct product operation

Information

Recommendation for product handling

1.2

The incremental encoder HOG 22 (HOG 22 M) is an opto electro nic precision measurement

device which must be handled with care by skilled personnel only.

1.3

The expected operating life of the device depends on the ball bearings, which are equipped

with a permanent lubrication.

1.4

The storage temperature range of the encoder is between -15 °C and +70 °C.

1.5

The operating temperature range of the encoder is between -30 °C and +85 °C, restricted in

potentially explosive environments, see

1.6

EU Declaration of Conformity meeting to the European Directives.

1.7

The device is UL approved (not applicable for operation in potentially explosive atmospheres).

1.8

We grant a 2-year warranty in accordance with the regulations of the ZVEI (Central Association

of the German Electrical Industry).

1.9

The encoder may be only opened as described in this instruction. Repair or maintenance

work that requires opening the encoder completely must be carried out by the manufacturer.

Alterations of the encoder are not permitted.

1.10

In the event of queries or subsequent deliveries, the data on the encoder type label must be

quoted, especially the type designation and the serial number.

1.11

Encoder components are to be disposed of according to the regulations prevailing in the

respective country.

Warning!

Damaging the seal

MB049 - 11114026

Baumer_HOG22_II_DE-EN (17A1)

section

on the device invalidates warranty.

2, measured at the housing.

General notes