Baumer HUBNER BERLIN PROFI NET microGen HMG10P Instructions de montage et d'utilisation - Page 4
Parcourez en ligne ou téléchargez le pdf Instructions de montage et d'utilisation pour {nom_de_la_catégorie} Baumer HUBNER BERLIN PROFI NET microGen HMG10P. Baumer HUBNER BERLIN PROFI NET microGen HMG10P 40 pages. Incremental encoder with magnetic sensing
Également pour Baumer HUBNER BERLIN PROFI NET microGen HMG10P : Instructions de montage et d'utilisation (32 pages), Manuel d'utilisation (44 pages)
Imprimer la page
IMPORTANT NOTES
1.
IMPORTANT NOTES
1.1
Symbol guide
Warning
Disregarding could result in serious injury, death or damage to property
)
Attention
Disregarding could result in damage to property or damage/malfunction of the device
i
Information
Additional information and recommendations
1.2
Intended use
The incremental encoder HMG10/HMG10P is a precision measurement device for the ac-
quisition of speed/position information for the control of drive units and the provision of
electronic output signals for downstream devices�
The device must not be used for any other purpose� The function of the device is descri-
bed in this mounting instruction� The customer must check the suitability for the purpose
intended�
Mounting and selection must be executed by authorized and qualified personnel. Moun-
ting, electrical commissioning or any other work with the device or system is to be perfor-
med by appropriately qualified staff only.
Do not put the device into service if there is any visible evidence of damage�
Do not operate the device beyond the limit values stated in this mounting instruction�
Any risk of personal injury, damage of the system or company equipment due to failure or
malfunction of the device must be eliminated by corresponding safety measures�
Warning
Disregarding intended use could result in serious injury or damage to property�
1.3
Exclusion from liability
The manufacturer is not liable for any damage to persons or property resulting from unin-
tended use of the device�
4/40
MB258EN - 11196411, 21A1, Baumer_HMG10-Inc_EN_202103_MI_11196411