Douglas Dynamics SnowEx 6800 Manuel d'instructions d'installation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Douglas Dynamics SnowEx 6800. Douglas Dynamics SnowEx 6800 14 pages. Light truck snowplow

Imprimer la page

OPERATIONAL TEST AND FINAL ADJUSTMENTS

BLADE DROP SPEED ADJUSTMENT

WARNING

Keep 8' clear of the blade when it is being

raised, lowered, or angled. Do not stand

between vehicle and blade or directly in front

of the blade. If the blade hits or drops on you,

you could be seriously injured.

The quill in the valve manifold adjusts the blade drop

speed.

1. Lower the blade to the ground before making any

adjustment.

2. Remove the hydraulic unit cover.

3. Turn the quill IN (clockwise) to decrease drop

speed. Turn the quill OUT (counterclockwise) to

increase drop speed.

4. Stand 8 feet clear of the blade when checking

adjustment.

5. Replace the cover.

Lit. No. 52524, Rev. 05

Quill

FINAL INSPECTION AND ADJUSTMENT

Keep 8' clear of the blade when it is being

raised, lowered, or angled. Do not stand

between vehicle and blade or directly in front

of the blade. If the blade hits or drops on you,

you could be seriously injured.

1. Check that the trip springs are adjusted correctly

by confirming that the coils of the springs are

separated slightly.

Overtightening of the springs will increase

the blade trip force and cause damage to the

springs and snowplow assembly.

2. Adjust the trip springs by tightening the top nuts

until the coils of the springs begin to separate

(a piece of paper such as this instruction sheet

should pass between the second and third coils).

3. Fully angle the blade in both directions in raised

and lowered positions. Adjust hose fittings, wraps,

and clamps so that the hoses do not contact the

vehicle bumper, have no sharp bends, and are

wrapped at contact points with, and do not become

pinched between the headgear and A‑frame.

4. Add grease to the two hitch pins.

Use a good quality

multipurpose grease.

WARNING

CAUTION

July 15, 2020