Baumer PMG10P Manuel d'utilisation - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Baumer PMG10P. Baumer PMG10P 40 pages. Absolute encoder
Également pour Baumer PMG10P : Instructions de montage et d'utilisation (32 pages), Instructions de montage et d'utilisation (36 pages), Instructions de montage et d'utilisation (32 pages), Manuel d'utilisation (44 pages), Manuel d'utilisation (44 pages), Manuel d'utilisation (40 pages), Manuel d'utilisation (40 pages), Manuel d'utilisation (36 pages)

Baumer Hübner

Ill. 3: Installing encoder, mounting device and coupling

Drive shaft

Attachment device (customized)

Tools

2.5 mm

Instruction:

a) Prior to installation, check the drive runout error and dimensions.

b) Mount the encoder in a way ensuring the electrical connection is protected against direct

water ingress.

c) Apply grease onto the drive shaft.

d) Mount the attachment device (customer-specific) to the drive using the fastening screws.

e) Push coupling onto the encoder shaft and tighten to the specified torque.

K35 permitted tightening torque:

Mt = 1 ±10 % Nm (plastic side)

Mt = 1.3 ±10 % Nm (metal side)

f) Mount the encoder using suitable screws, e.g. M6x16 mm (ISO 4017) onto the B10 flange of

drive or attachment device (customer-specific).

g) Fasten the coupling on the drive shaft.

K35 Permitted tightening torque:

Mt = 1 ±10 % Nm (plastic side)

Mt = 1.3 ±10 % Nm (metal side)

Observe the remarks in the data sheet and the coupling assembly instructions.

V1 | PMG10 & PMG10P CANopen

10 mm

Mounting screw M6x16 mm for attach-

ment device (ISO 4017)

Coupling

Operating Manual

Installation