Asus RP-N12 Manuel de démarrage rapide - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Asus RP-N12. Asus RP-N12 37 pages. Wireless-n300 range extender
Également pour Asus RP-N12 : Manuel de démarrage rapide (2 pages), Manuel de démarrage rapide (7 pages)

Imprimer la page

1. Setting up the Range Extender

Setting up the Range Extender

Turning the Range Extender on

1. Place RP-N12 near your Router/AP.

2. Plug RP-N12 to a power outlet, wait for one (1) minute until

the Wi-Fi LED starts to blink.

Connecting to a network

Select one of the following ways to connect the Range Extender

to a network.

Option A: Connecting through GUI

1. Use a Wi-Fi enabled device, such as your desktop PC/note-

book/tablet, to find and connect to ASUS_RPN12 wireless

network.

2. Launch a web browser and enter http://repeater.asus.com in

the address bar to access the Range Extender.

3. Enter the default login name and password, which are admin/

admin.

4. Follow the Quick Internet Setup steps below to set up the

Range Extender:

na10206_rp-n12_qsg.indb 4

• Connect to a Wi-Fi network and when prompted, enter the

security key. If your Wi-Fi network is hidden, click Manual

setting.

• You can either tick "Use default setting" or enter the SSID

and security key/password for your extended network. When

done, click Next.

NOTE: The Range Extender's wireless network name (SSID)

changes to your existing Wi-Fi network name, ending with _RPT

and shares your router/AP's Wireless Password.

• Connect your wireless devices to the new Extender network.

Option B: Using WPS (Wi-Fi Protected Setup)

1. Press the WPS button on the router/AP.

2. Press the WPS button on the side of the RP-N12 for more than

two (2) seconds, until the Wi-Fi LED starts to blink.

NOTE: Refer to the router's manual for the location of the WPS

button.

2015/5/8 12:03:20