Asus RT-AC56U Manuel de démarrage rapide

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Asus RT-AC56U. Asus RT-AC56U 3 pages. Dual band 2x2 802.11ac
Également pour Asus RT-AC56U : Manuel de l'utilisateur (30 pages), Manuel de l'utilisateur (30 pages)

Asus RT-AC56U Manuel de démarrage rapide
Contents
1 Hardware
Specifications
1.1 RT-AC56S
2 Flashing DD-WRT
Firmware
3 Reset
4 Recovery Mode
Flashing
4.1 OEM
Firmware
Installation
5 VLAN Configuration
6 Overclocking
Hardware Specifications
FCC ID: MSQ-RTAC56U (or MSQ-RTAC56UA)
CPU: Broadcom BCM4708A0 (800 MHz, 2 cores)
Flash / RAM: 128 MiB / 256 MiB
WAN: 1 port, 10/100/1000
LAN: 4 ports, 10/100/1000
USB: 2 ports, USB 3.0, USB 2.0
WI1: Broadcom BCM4352, an+ac
1.
MIMO config: 2x2:2
2.
Antenna connector: none
WI2: Broadcom BCM43217, bgn
1.
MIMO config: 2x2:2
2.
Antenna connector: none
ETH chip1: Broadcom BCM4708A0
Switch: Broadcom BCM4708A0
Power Supply: 19V (DC) @ max 1.75A
RT-AC56S
This uses the single-core CPU variant (BCM47081A0), has 128 MiB RAM, and different power supply.
There is no evidence that it is supported at all, despite the FCC ID being listed as MSQ-RTAC56UA (CPU in
the Internal Photos is BCM4708A0). Do not try AC56U firmware on an AC56S unless willing to brick.
AsusWRT-Merlin might work on the AC56S with AC56U firmware, but no official support is mentioned.
Flashing DD-WRT Firmware
Brainslayer builds for ARM Broadcom routers have their own directory. Do not use the /broadcom*/
directories. Example: asus_rt-ac56u-firmware.trx tested here but this isn't a recommendation. New build links:
Flashing DD-WRT Firmware
Asus_RT-AC56U
1