Baumer TA201 Manuel d'utilisation - Page 25

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Baumer TA201. Baumer TA201 36 pages. Electronic

Imprimer la page

Test start ➜ Press keys

Test extension ➜ Using the

Test end The test routine can only be interrupted by switching off the device.

Test program version Press the

3.3

Connecting the sensor supply

Connect the sensor supply at terminals 4 and 5. However, do not

use the sensor supply to supply unearthed inductances or capacita-

tive loads.

The sensor supply is not short circuit-proof.

Terminal

Voltage

0 V

12...26 VDC

3.4

Executing the test routine

The test routine is described below.

and

●

All display segments are displayed automatically in sequence and

so performance tested.

key, test the keyboard and the inputs in turn.

Keyboard test

Input test

●

The inputs can be triggered simultaneously or individually.

The display is active in the idle status.

Display: program number and version number

Display: program date

Test of various input levels (operating points), signal forms and of the

phase discriminator (test of numbers 1 to 9)

After switching the mains supply back on, the device is automatically

ready for operation.

key, switch on the device

(hold the key down for this period).

Display: program number and version number

Display: program date

www.baumerivo.com

Max.

residual ripple

–

Depending on load

switch on the device at the same time.

TA201

Max.

perm. current

–

100 mA