Asus RT-N16 Manuel - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Asus RT-N16. Asus RT-N16 9 pages.
Imprimer la page
Known Issues, Bugs, and Workarounds
•
Hardware fix (capacitor) for RT-N16 wireless drop-outs [6]
•
UPNP is currently not working for the RT-N16, so for now leave the feature disabled unless you want
a full CPU Load. FIXED with SVN Changeset #13527
•
Access Restriction with MAC-Filter doesn't work on Asus RT-N16. FIXED Ticket #1319 (as of
12/18/09)
•
On this router the reset button will only bring you to recovery mode. If you wish to restore defaults,
use the Red WPS button while plugging power in. Post By Eko
Rflow data reports only on upload traffic (Ticket #1139). Further discussion in this thread (only
•
affects those using/enabling Rflow).
USB hard drives after build 15407: "The devs of dd-wrt have removed the loading of file system
•
drivers from the startup of the firmware. They are now loaded on demand with automount. Well, this
presents a problem for those of us with USB HDD that automount doesn't detect. In order to load the
file system drivers at startup you need to add the following to save startup in the commands tab" for
more, see TechInfoDepot DD-WRT Notes
NVRAM K2.6 Limitation
This is included for historical reference. Use the installation instructions above to flash a K3X build.
•
The RT-N16 only has 32K of NVRAM on k2.6 builds, and due to CFE limitations, some reported
reboots and resets due to running out of NVRAM. K3X builds have expanded the default nvram
partition via software.
•
However, getting K3X to run on this model can be tricky, `erase nvram` can cause a soft brick,
requiring TFTP. redhawk0's procedure is here, also read the RT-N16 Condensed thread starting here
NVRAM Usage Reduction
Using traff (Traffic graph in Status_Internet.asp) or UPnP will cause the NVRAM to fill up quickly,
•
causing router functions like ddns to stop functioning. Upon the next reboot the router will reset it self
to firmware defaults. Disable traff and/or UPnP to prevent this, or flush the traff stats occasionally.
•
Note on traff: Status -> WAN -> (at the buttom) Data Administration -> button "Delete" flushes the
traff stats. Services -> Services -> WAN Traffic Counter -> ttraff Daemon: Disable -> Apply settings,
will stop the collection of traff data. You may however just choose to reset/delete traff data every
month, and the traff data will not take much room in the NVRAM
Note on UPnP: Access to UPnP settings: NAT/QoS -> UPnP. In newer builds (Spring 2012) UPnP is
•
disabled by default.
•
Note on monitoring NVRAM usage. In newer builds (spring 2012) NVRAM usage/max is displayed
on the front Web GUI at "Space Usage"
NVRAM Reduction Scripts
•
Save the following as a startup script, it will remove initialized variables that are stored in NVRAM
and currently have no value assigned to them (This cleared up nearly 5K of NVRAM in my
experience).
Known Issues, Bugs, and Workarounds
Asus_RT-N16
7