Asus WL-500b Manuel de l'utilisateur - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Asus WL-500b. Asus WL-500b 26 pages. For 802.11g/b wireless clients
Également pour Asus WL-500b : Manuel de l'utilisateur (43 pages)

Imprimer la page
Asus WL-500b Manuel de l'utilisateur
Chapter 2 - Installation

2. Installation

This chapter describes the installation procedure for the SpaceLink Home
Gateway and includes a description of the LEDs found on the unit.

Installation Procedure

Follow these steps to install the SpaceLink Home Gateway.
1. Location: Determine the best location for the SpaceLink Home
Gateway. Keep in mind the following considerations:
•
The length of the Ethernet cable that connects the Home Gateway
to the network must not exceed 100 meters.
•
For standard placement, try to place the Home Gateway on a flat,
sturdy surface as far from the ground as possible, such as on top of
a desk or bookcase, keeping clear of metal obstructions and away
from direct sunlight.
•
Try to centrally locate the Home Gateway so that it will provide cov-
erage to all of the wireless mobile devices in the area. Orientating the
antenna vertically should provide the best reception.
•
Use only the power supply that came with this unit. Other power
supplies may fit but the voltage and power may not be compatible.
It is the responsibility of the installer and users of the SpaceLink
Home Gateway to guarantee that the antenna is operated at least
20 centimeters from any person. This is necessary to insure that
the product is operated in accordance with the RF Guidelines for
Human Exposure which have been adopted by the Federal Com-
munications Commission.
2. Mounting: Place the Home Gateway in the desired location. Wall
mounting is also possible for the Home Gateway. Refer to the section
entitled "Wall Mounting Option" for details.
3. WAN Connection: Attach one end of the provided RJ-45 Ethernet cable
to the SpaceLink Home Gateway's WAN port and attach the other end
to the RJ-45 Ethernet cable to your ADSL or Cable modem.
The SpaceLink Home Gateway WAN port does not support 100Base-
TX; it only supports 10Base-T. The WAN port may be connected to
devices that supports both 10/100, but not pure 100Base-TX.
20
SpaceLink Home Gateway