Douwe Egberts Cafitesse 700 Manuel de l'opérateur - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} Douwe Egberts Cafitesse 700. Douwe Egberts Cafitesse 700 11 pages.
Imprimer la page
Safety instructions
Electrical connection
• If the power supply cable of the dispenser is
damaged it may only be replaced by a
workshop approved by the manufacturer, as
special tools are needed for the replacement.
• The dispenser must be connected to the
drinking water line and to the electric line in
compliance with local regulations.
• The dispenser must be connected to a
secured electric circuit.
We recommend to install a fault current
safety switch. The connection must be made
using an earthed safety plug socket
complying with valid regulations.
After the dispenser has been
installed, the power supply plug
must be accessible.
Observe the local regulations!
• If the dispenser is operated with a
permanently wired current supply (without
mains plug) the electric circuit must be
equipped with a circuit breaker with a contact
opening of at least 3 mm that controls all
poles.
6
Hygiene
• Observe the instructions given on the packs
regarding correct handling and storing of the
product packs (BIB).
The drinking water quality must be
checked prior to the delivery of cold
beverages. Observe the regulations
specific for the country!
• Regular cleaning of the dispenser is
necessary for functional and hygienic
reasons.
When cleaning, take care of sharp
edges. There is danger of injuries!
• To clean the housing only use cleaning
agents approved by the food industry.
• The special cleaning agent must be used for
cleaning.
• Clean the inside and outside of the dispenser
by using a damp cloth and do not splash it.
05.2003