Baumer KTD 2-B14 Series Manuel d'installation et d'utilisation - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Baumer KTD 2-B14 Series. Baumer KTD 2-B14 Series 17 pages. Tachogenerators 1-piece
Imprimer la page
6.
Electrical connection
6.1. Safety instructions for electrical connection
• Warning! Observe the additional safety precautions in chapter 4.
• Warning! Danger of electric shock!
Make sure tachogenerator is not live for the time of electrical commissio-
ning!
Switch off power supply of any equipment involved!
Ensure proper grounding!!
6.2. Electrical commissioning
• Remove housing.
• Insert the connecting cable into gland M8.
• Connect protective earth to terminal M4-PE (ground) .
• Execute cable terminal assignment.
• Red = + (positive polarity);
Blue = - (negative polarity)
with clockwise rotation.
• Tighten the cable gland.
Note: Only use cables
recommended by Baumer..
Important: Keep inside cabling
as short as possible but without
strain. Any wires touching the
rotor will cause device malfunction.
7. Maintenance, repair & disposal
• Any repair work of the tachogenerator by the manufacturer only.
• Dispose of all integrated components in compliance with the country-specific
provisions.
Baumer_KTD2A4L-KTD2B14_OI_DE-EN_1607.indd
max. 1.2 Nm
rotation direction of the shaft
tacho-
generator
- (blue)
+ (red)
connection
motor
13