Comar Systems SLR-200G Manuel d'installation et de référence rapide - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et de référence rapide pour {nom_de_la_catégorie} Comar Systems SLR-200G. Comar Systems SLR-200G 6 pages. Ais receiver

Imprimer la page

To keep up to date with information about AIS compliance and

the current status on different regulations surrounding the

fitting of AIS transponders we recommend you visit

www.uais.org/CarriageRequirements.htm

Contents of this Box

Before proceeding with the installation of the SLR-200, please check

the content of the box, which should include:

The SLR-200 AIS receiver with trunnion mounting bracket.

Interface cable for connection to PC

Interface cable for NMEA connection

Power cable (12/ 24 volts)

Installation and quick Reference Guide.

Installing the SLR-200 Receiver

Installing the antenna

The SLR-200 Receiver is not supplied with a VHF antenna as the

type of antenna and cable requirements differ from vessel to vessel.

An antenna can be acquired from a marine electronics outlet.

Hint:

The antenna connector type is BNC, 50 ohms.

Antenna location

Hint:

The AIS VHF antenna should be separated as far as possible from

the voice VHF to avoid unnecessary interference.

Hint:

Best separation is achieved by installing the antennas over each

other or on separate sides of the mast.

Hint:

The VHF antenna should be mounted at least 3 metres away from

and out of the transmitting beam of high-power transmitters or other VHF

antenna installations.

Hint:

Mount the antenna with a relatively clear view of the horizon. Large

obstructions that might shade the antenna should be avoided.

Hint:

The higher the antenna is located, the longer the range.

Technical specifications

SLR-200 is a compact dual channel synthesised VHF receiver

designed to receive and decode transmissions from vessels fitted

with Class A AIS transceivers.

Electrical

Power supply range:

9 - 30 Volts DC

Power consumption:

400mW

Output

Baud rate:

38400 Baud (38.4Kb) or 4800 (internal link)

Format:

ITU/ NMEA 0183

Output message:

VDM

Receiver

Frequency:

AIS 161.975 MHz

AIS 162.025 MHz

Channel spacing:

25KHz

Sensitivity:

-112dBm

Demodulation:

GMSK

Data Rate:

9600

Antenna Impedance:

50 ohms

Physical

Dimensions:

Length: 140mm,

Width: 120mm,

Height: 50mm

Weight: 600g

Mounting:

Trunnion bracket

Connectors:

Antenna BNC

Output port:

9 pin D socket

Power:

2-pole plug

Designed to meet:

IEC 61993-2

CE Approval to EN 60945: EN 6100-6-1/2

FCC part 15