Baumer SXC21c Manuel de l'utilisateur - Page 34

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Baumer SXC21c. Baumer SXC21c 48 pages. Sxc series cameralink cameras with truesense imaging sensors
Également pour Baumer SXC21c : Manuel de démarrage rapide (2 pages)

Imprimer la page
Baumer SXC21c Manuel de l'utilisateur
Figure 36 ►
IO matrix of the 
Baumer  SXC  on  output 
side.
34
8.5.1.3.
Configurable
With this feature, Baumer offers the possibility of wiring the output connectors to internal 
signals, which are controlled on the software side.
Hereby on cameras of the SX series, 14 signal sources – subdivided into three categories 
– can be applied to the output connectors.
The first category of output signals represents a loop through of signals on the input side, 
such as:
Signal Name
Line0
Line1
Line2
FrameGrabberLine0
FrameGrabberLine1
FrameGrabberLine2
FrameGrabberLine3
Within the second category you will find signals that are created on camera side:
Signal Name
FrameActive
ExposureActive
TransferActive
ReadyForTrigger
TriggerOverlapped
TriggerSkipped
Beside the 11 signals mentioned above, each output can be wired to a user-defined 
signal ("UserOutput0", "UserOutput1", "UserOutput2") or disabled ("OFF").
(Output) Line 7
(Output) Line 8
(Output) Line 9
Outputs
Explanation
Signal of input "Line0" is loopthroughed to this ouput
Signal of input "Line1" is loopthroughed to this ouput
Signal of input "Line2" is loopthroughed to this ouput
Signal of input "FrameGrabberLine0" is loopthroughed to 
this ouput
Signal of input "FrameGrabberLine1" is loopthroughed to 
this ouput
Signal of input "FrameGrabberLine2" is loopthroughed to 
this ouput
Signal of input "FrameGrabberLine3" is loopthroughed to 
this ouput
Explanation
The camera processes a Frame consisting of exposure
and readout
Sensor exposure in progress
Image transfer via hardware interface in progress
Camera is able to process an incoming trigger signal
The camera operates in overlapped mode
Camera rejected an incoming trigger signal
state selection
signal selection
(software side)
(software side)
state high
state low
state high
state low
state high
state low
IO Matrix
FrameGrabberLine3