Dover Almatec Quattroflow-20k Series Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dover Almatec Quattroflow-20k Series. Dover Almatec Quattroflow-20k Series 17 pages. 4-piston diaphragm pump
Imprimer la page
Version of May, 2009
3.4 Start-Up
Prior to leaving our factory all pumps are subjected to a leakage and performance test.
Only properly operating pumps leave the factory achieving the performances assured by us.
It is possible that there will be a few milliliters of water inside the pump.
Prior to each use we recommend flushing the pump with a proper fluid (i.e. water or buffer)
Prior to the very first use it might make sense to clean and sanitize the pump chamber.
A commercial caustic cleaner and/or 0.5 to 1 mol of NaOH can be used.
The chosen cleaning agent can be recirculated and also stored inside the pump chamber.
For flushing out of any cleaning agent do not recirculate!
Check with appropriate analytical methods the success of the flushing procedure.
Recommendation: Test run prior first use!
Before using your pump in your process (for example as recirculation pump in a TFF
system) perform a test run to get used to the specific properties of the pump.
Please note:
ALMATEC Maschinenbau GmbH is also building custom-made pumps and set-ups.
These modified pumps can be different from this one that is described in here.
However the basic information is applicable to all of the Quattroflow 20k Series pumps.
Please do not hesitate to contact us for further information:
ALMATEC Maschinenbau GmbH
Carl-Friedrich-Gauss-Str. 5
D-47475 Kamp-Lintfort
Germany
Phone:
Fax:
e-mail:
Internet:
+49 2842 961-0
+49 2842 961-40
www.quattroflow.com
Page 9 of 17