Amphenol RESMLAC 28 MG Manuel d'installation - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Amphenol RESMLAC 28 MG. Amphenol RESMLAC 28 MG 15 pages. Ip67 rugged ethernet managed switch
Également pour Amphenol RESMLAC 28 MG : Manuel d'installation (15 pages)
Imprimer la page
RESMLAC 28MG IG rev. 1.3
Amphenol
– 948, Promenade de l'Arve – B.P. 29 – 74311 THYEZ Cedex – France - +33(0)4.50.89.28.00 – www.rjswitch.com
Functional shock, Method 516.6, Procedure I
Transportation Vibration, Method 514.6, Category 4 & 10
Salt Fog, Method 509.5
•
MIL-STD-167-1A
Shipboard vibration, Type I
•
IP67
•
Support up to 50ms holdup time, and 6VDC drops
CHASSIS
•
Low profile rugged aluminum extrusion
•
Conductively cooled w/custom internal heat-sinks
•
Ingress protection against sand, dust and moisture
•
Anodize Coating, MIL-A-8625, Type II, Class 2
PERFORMANCE
•
96.8 Mbps wire speed forwarding rate
•
56 Gbps maximum forwarding bandwidth
•
8K MAC Address
NETWORKING - GENERAL
•
Wire-speed hardware-based 28 ports gigabit ethernet switch
•
Multicasting (IGMP Snooping), GARP, GMRP, MLD and GVRP.
•
Multicast groups up to 8K for both IPv4 and IPv6
•
Broadcasting and flooding Control up to 8K Groups
•
802.1q Tagged based VLAN up to 4K VLAN groups
•
Bridge support for VLAN Q-in-Q
•
Link Aggregation 802.3ad, up to 16 members in group
•
Link Aggregation mechanism based on L2/ L3/ L4 parameters.
•
Jumbo Frame support up to 10K
•
WEB, CLI, Telnet Management.
NETWORKING – QUALITY OF SERVICE
•
QoS Multi-Layer Classifier: 802.1p, EtherType, VLAN-ID, IPv4/6 DSCP/ToS,
and UDP/TCP ports & ranges traffic classification.
•
Per port WFQ and Strict Queuing scheduling
•
DSCP remarking for both IPv4 and IPv6 frames
•
Ingress policer and ingress shaper per port with 500Kbps granularity
•
Egress shaper per port with 500Kbps granularity
•
Full-duplex flow control (IEEE802.3X) and half-duplex backpressure, symmetric
and asymmetric
Page 12 of 15
Last Rev: 1-Feb-21