Comat Releco CMS-10R Series Faq

Parcourez en ligne ou téléchargez le pdf Faq pour {nom_de_la_catégorie} Comat Releco CMS-10R Series. Comat Releco CMS-10R Series 7 pages. Messaging system
Également pour Comat Releco CMS-10R Series : Manuel d'instruction abrégé (2 pages)

Imprimer la page
CMS-10R FAQ
Storage:
https://www.comatreleco.com/betriebsanleitung_cms/

1. FAQ device installation

- Who will install the CMS-10R?
➔ The CMS-10R may only be installed by qualified electricians.
- Why is no LED lit?
➔ Mount the antenna and connect the device with the appropriate rated voltage
(CMS-10R-D: 110 - 240 V AC / CMS-10R-DA and CMS-10R-DAC: 12 - 48V DC).
- What is the status of the LEDs?
➔ Status LEDs Radio signal
These LEDs indicate the currently used radio standard (2G, 3G or 4G).
The colour indicates the signal strength:
➔ Status LEDs Outputs
➔ RUN LED
➔ STAT LED
➔ Status LEDs Inputs
Digital inputs
Analogue inputs
Operating mode
LED not lighting up
Fallback: Event storage on the device
LED flashing orange
Fallback: SMS directly to recipient
LED lighting up orange
Normal operation
LED flashes green
Fallback: SMS directly to recipient
LED lights up green
Normal operation
Status
LED not lighting up
Relay switched off. Relay contact is open
LED lights up
Relay switched off. Relay contact is closed
Status
LED not lighting up
The device is switched off or is not working, --
see chapter 7.2.
LED flashing
The device and the firmware are ready for use and are in operation
Status
LED not lighting up
Normal operation
LED flashing
Firmware update
LED flashing
Firmware update/restart
LED lights up
Device shuts down/exits all running tasks
LED flashing
Device shuts down/terminates connection to
IoT platform and mobile network
Status
LED not lighting up
Input value = logic level 0 (low)
LED lights up
Input value = logic level 1 (high)
LED not lighting up
Input level ≤ lower threshold value
LED flashing
Lower threshold value < input level < upper threshold value
LED lights up
Input level ≥ upper threshold value
Radio network
IoT-Portal
None
not connected
Poor reception
not connected
Poor reception
Connected
Good reception
not connected
Good reception
Connected
Flashing frequency
--
--
Flashing frequency
Slow
Flashing frequency
--
Fast, flashing
Slow
--
Fast, even
Flashing frequency
--
--
--
Slow
--